fix(frontend): open original only when tapping the preview image

The preview area was one big link, so a click anywhere in it — including
the black letterbox margins — opened the original. Make the link
pointer-events:none and re-enable pointer-events on the image itself, so
"open original" fires only on the image, not the surrounding margins.

Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>

.gitea/workflows/deploy.yml

@@ -19,7 +19,9 @@ jobs:
     # existing clone in /opt/tanabata. See docs/DEPLOY.md for runner setup.
     #
     # Only shell steps here (no `uses:` actions), so the host needs git + docker
-    # and nothing else — no node, no rsync.
+    # and nothing else — no node, no go, no rsync. The test step below runs the
+    # Go and Node toolchains inside throwaway containers, so nothing has to be
+    # installed on the host.
     runs-on: host
 
     env:
@@ -35,6 +37,47 @@ jobs:
           git fetch --prune origin
           git reset --hard origin/master
 
+      - name: Run tests
+        working-directory: /opt/tanabata
+        # Everything runs INSIDE throwaway toolchain containers — the host only
+        # needs docker (which it already uses for `docker compose`). Nothing (Go,
+        # Node, Postgres, vips/ffmpeg/exiftool) has to be installed on the host.
+        # The orchestration below uses only bash builtins + docker. A failure here
+        # fails the job, so a red build never reaches production. Module/npm caches
+        # persist in named volumes for speed.
+        shell: bash
+        run: |
+          set -euo pipefail
+
+          docker rm -f tfm-ci-db >/dev/null 2>&1 || true
+          docker network rm tfm-ci-net >/dev/null 2>&1 || true
+          docker network create tfm-ci-net >/dev/null
+          trap 'docker rm -f tfm-ci-db >/dev/null 2>&1 || true; docker network rm tfm-ci-net >/dev/null 2>&1 || true' EXIT
+
+          docker run -d --name tfm-ci-db --network tfm-ci-net \
+            -e POSTGRES_PASSWORD=postgres postgres:14-alpine >/dev/null
+          # Wait for Postgres, using pg_isready inside the DB container (no host tools).
+          for ((i = 0; i < 30; i++)); do
+            docker exec tfm-ci-db pg_isready -U postgres >/dev/null 2>&1 && break
+            sleep 1
+          done
+
+          # Backend: full suite, including the integration tests, against the
+          # ephemeral Postgres. -buildvcs=false since the .git dir isn't mounted.
+          docker run --rm --network tfm-ci-net \
+            -v /opt/tanabata/backend:/src -w /src \
+            -v tfm-ci-gomod:/go/pkg/mod -v tfm-ci-gocache:/root/.cache/go-build \
+            -e CGO_ENABLED=0 \
+            -e TANABATA_TEST_ADMIN_DSN="postgres://postgres:postgres@tfm-ci-db:5432/postgres?sslmode=disable" \
+            golang:1.26-alpine go test -buildvcs=false -count=1 ./...
+
+          # Frontend: type-check + production build (also validates openapi via
+          # the generate:types prestep).
+          docker run --rm \
+            -v /opt/tanabata:/repo -w /repo/frontend \
+            -v tfm-ci-npm:/root/.npm \
+            node:22-alpine sh -c "npm ci && npm run check && npm run build"
+
       - name: Build image and start the stack
         working-directory: /opt/tanabata
         # .env must already exist in DEPLOY_DIR on the host (secrets + DB mode).

LICENSE

@@ -0,0 +1,661 @@
+                    GNU AFFERO GENERAL PUBLIC LICENSE
+                       Version 3, 19 November 2007
+
+ Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/>
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+                            Preamble
+
+  The GNU Affero General Public License is a free, copyleft license for
+software and other kinds of works, specifically designed to ensure
+cooperation with the community in the case of network server software.
+
+  The licenses for most software and other practical works are designed
+to take away your freedom to share and change the works.  By contrast,
+our General Public Licenses are intended to guarantee your freedom to
+share and change all versions of a program--to make sure it remains free
+software for all its users.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+them if you wish), that you receive source code or can get it if you
+want it, that you can change the software or use pieces of it in new
+free programs, and that you know you can do these things.
+
+  Developers that use our General Public Licenses protect your rights
+with two steps: (1) assert copyright on the software, and (2) offer
+you this License which gives you legal permission to copy, distribute
+and/or modify the software.
+
+  A secondary benefit of defending all users' freedom is that
+improvements made in alternate versions of the program, if they
+receive widespread use, become available for other developers to
+incorporate.  Many developers of free software are heartened and
+encouraged by the resulting cooperation.  However, in the case of
+software used on network servers, this result may fail to come about.
+The GNU General Public License permits making a modified version and
+letting the public access it on a server without ever releasing its
+source code to the public.
+
+  The GNU Affero General Public License is designed specifically to
+ensure that, in such cases, the modified source code becomes available
+to the community.  It requires the operator of a network server to
+provide the source code of the modified version running there to the
+users of that server.  Therefore, public use of a modified version, on
+a publicly accessible server, gives the public access to the source
+code of the modified version.
+
+  An older license, called the Affero General Public License and
+published by Affero, was designed to accomplish similar goals.  This is
+a different license, not a version of the Affero GPL, but Affero has
+released a new version of the Affero GPL which permits relicensing under
+this license.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+                       TERMS AND CONDITIONS
+
+  0. Definitions.
+
+  "This License" refers to version 3 of the GNU Affero General Public License.
+
+  "Copyright" also means copyright-like laws that apply to other kinds of
+works, such as semiconductor masks.
+
+  "The Program" refers to any copyrightable work licensed under this
+License.  Each licensee is addressed as "you".  "Licensees" and
+"recipients" may be individuals or organizations.
+
+  To "modify" a work means to copy from or adapt all or part of the work
+in a fashion requiring copyright permission, other than the making of an
+exact copy.  The resulting work is called a "modified version" of the
+earlier work or a work "based on" the earlier work.
+
+  A "covered work" means either the unmodified Program or a work based
+on the Program.
+
+  To "propagate" a work means to do anything with it that, without
+permission, would make you directly or secondarily liable for
+infringement under applicable copyright law, except executing it on a
+computer or modifying a private copy.  Propagation includes copying,
+distribution (with or without modification), making available to the
+public, and in some countries other activities as well.
+
+  To "convey" a work means any kind of propagation that enables other
+parties to make or receive copies.  Mere interaction with a user through
+a computer network, with no transfer of a copy, is not conveying.
+
+  An interactive user interface displays "Appropriate Legal Notices"
+to the extent that it includes a convenient and prominently visible
+feature that (1) displays an appropriate copyright notice, and (2)
+tells the user that there is no warranty for the work (except to the
+extent that warranties are provided), that licensees may convey the
+work under this License, and how to view a copy of this License.  If
+the interface presents a list of user commands or options, such as a
+menu, a prominent item in the list meets this criterion.
+
+  1. Source Code.
+
+  The "source code" for a work means the preferred form of the work
+for making modifications to it.  "Object code" means any non-source
+form of a work.
+
+  A "Standard Interface" means an interface that either is an official
+standard defined by a recognized standards body, or, in the case of
+interfaces specified for a particular programming language, one that
+is widely used among developers working in that language.
+
+  The "System Libraries" of an executable work include anything, other
+than the work as a whole, that (a) is included in the normal form of
+packaging a Major Component, but which is not part of that Major
+Component, and (b) serves only to enable use of the work with that
+Major Component, or to implement a Standard Interface for which an
+implementation is available to the public in source code form.  A
+"Major Component", in this context, means a major essential component
+(kernel, window system, and so on) of the specific operating system
+(if any) on which the executable work runs, or a compiler used to
+produce the work, or an object code interpreter used to run it.
+
+  The "Corresponding Source" for a work in object code form means all
+the source code needed to generate, install, and (for an executable
+work) run the object code and to modify the work, including scripts to
+control those activities.  However, it does not include the work's
+System Libraries, or general-purpose tools or generally available free
+programs which are used unmodified in performing those activities but
+which are not part of the work.  For example, Corresponding Source
+includes interface definition files associated with source files for
+the work, and the source code for shared libraries and dynamically
+linked subprograms that the work is specifically designed to require,
+such as by intimate data communication or control flow between those
+subprograms and other parts of the work.
+
+  The Corresponding Source need not include anything that users
+can regenerate automatically from other parts of the Corresponding
+Source.
+
+  The Corresponding Source for a work in source code form is that
+same work.
+
+  2. Basic Permissions.
+
+  All rights granted under this License are granted for the term of
+copyright on the Program, and are irrevocable provided the stated
+conditions are met.  This License explicitly affirms your unlimited
+permission to run the unmodified Program.  The output from running a
+covered work is covered by this License only if the output, given its
+content, constitutes a covered work.  This License acknowledges your
+rights of fair use or other equivalent, as provided by copyright law.
+
+  You may make, run and propagate covered works that you do not
+convey, without conditions so long as your license otherwise remains
+in force.  You may convey covered works to others for the sole purpose
+of having them make modifications exclusively for you, or provide you
+with facilities for running those works, provided that you comply with
+the terms of this License in conveying all material for which you do
+not control copyright.  Those thus making or running the covered works
+for you must do so exclusively on your behalf, under your direction
+and control, on terms that prohibit them from making any copies of
+your copyrighted material outside their relationship with you.
+
+  Conveying under any other circumstances is permitted solely under
+the conditions stated below.  Sublicensing is not allowed; section 10
+makes it unnecessary.
+
+  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
+
+  No covered work shall be deemed part of an effective technological
+measure under any applicable law fulfilling obligations under article
+11 of the WIPO copyright treaty adopted on 20 December 1996, or
+similar laws prohibiting or restricting circumvention of such
+measures.
+
+  When you convey a covered work, you waive any legal power to forbid
+circumvention of technological measures to the extent such circumvention
+is effected by exercising rights under this License with respect to
+the covered work, and you disclaim any intention to limit operation or
+modification of the work as a means of enforcing, against the work's
+users, your or third parties' legal rights to forbid circumvention of
+technological measures.
+
+  4. Conveying Verbatim Copies.
+
+  You may convey verbatim copies of the Program's source code as you
+receive it, in any medium, provided that you conspicuously and
+appropriately publish on each copy an appropriate copyright notice;
+keep intact all notices stating that this License and any
+non-permissive terms added in accord with section 7 apply to the code;
+keep intact all notices of the absence of any warranty; and give all
+recipients a copy of this License along with the Program.
+
+  You may charge any price or no price for each copy that you convey,
+and you may offer support or warranty protection for a fee.
+
+  5. Conveying Modified Source Versions.
+
+  You may convey a work based on the Program, or the modifications to
+produce it from the Program, in the form of source code under the
+terms of section 4, provided that you also meet all of these conditions:
+
+    a) The work must carry prominent notices stating that you modified
+    it, and giving a relevant date.
+
+    b) The work must carry prominent notices stating that it is
+    released under this License and any conditions added under section
+    7.  This requirement modifies the requirement in section 4 to
+    "keep intact all notices".
+
+    c) You must license the entire work, as a whole, under this
+    License to anyone who comes into possession of a copy.  This
+    License will therefore apply, along with any applicable section 7
+    additional terms, to the whole of the work, and all its parts,
+    regardless of how they are packaged.  This License gives no
+    permission to license the work in any other way, but it does not
+    invalidate such permission if you have separately received it.
+
+    d) If the work has interactive user interfaces, each must display
+    Appropriate Legal Notices; however, if the Program has interactive
+    interfaces that do not display Appropriate Legal Notices, your
+    work need not make them do so.
+
+  A compilation of a covered work with other separate and independent
+works, which are not by their nature extensions of the covered work,
+and which are not combined with it such as to form a larger program,
+in or on a volume of a storage or distribution medium, is called an
+"aggregate" if the compilation and its resulting copyright are not
+used to limit the access or legal rights of the compilation's users
+beyond what the individual works permit.  Inclusion of a covered work
+in an aggregate does not cause this License to apply to the other
+parts of the aggregate.
+
+  6. Conveying Non-Source Forms.
+
+  You may convey a covered work in object code form under the terms
+of sections 4 and 5, provided that you also convey the
+machine-readable Corresponding Source under the terms of this License,
+in one of these ways:
+
+    a) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by the
+    Corresponding Source fixed on a durable physical medium
+    customarily used for software interchange.
+
+    b) Convey the object code in, or embodied in, a physical product
+    (including a physical distribution medium), accompanied by a
+    written offer, valid for at least three years and valid for as
+    long as you offer spare parts or customer support for that product
+    model, to give anyone who possesses the object code either (1) a
+    copy of the Corresponding Source for all the software in the
+    product that is covered by this License, on a durable physical
+    medium customarily used for software interchange, for a price no
+    more than your reasonable cost of physically performing this
+    conveying of source, or (2) access to copy the
+    Corresponding Source from a network server at no charge.
+
+    c) Convey individual copies of the object code with a copy of the
+    written offer to provide the Corresponding Source.  This
+    alternative is allowed only occasionally and noncommercially, and
+    only if you received the object code with such an offer, in accord
+    with subsection 6b.
+
+    d) Convey the object code by offering access from a designated
+    place (gratis or for a charge), and offer equivalent access to the
+    Corresponding Source in the same way through the same place at no
+    further charge.  You need not require recipients to copy the
+    Corresponding Source along with the object code.  If the place to
+    copy the object code is a network server, the Corresponding Source
+    may be on a different server (operated by you or a third party)
+    that supports equivalent copying facilities, provided you maintain
+    clear directions next to the object code saying where to find the
+    Corresponding Source.  Regardless of what server hosts the
+    Corresponding Source, you remain obligated to ensure that it is
+    available for as long as needed to satisfy these requirements.
+
+    e) Convey the object code using peer-to-peer transmission, provided
+    you inform other peers where the object code and Corresponding
+    Source of the work are being offered to the general public at no
+    charge under subsection 6d.
+
+  A separable portion of the object code, whose source code is excluded
+from the Corresponding Source as a System Library, need not be
+included in conveying the object code work.
+
+  A "User Product" is either (1) a "consumer product", which means any
+tangible personal property which is normally used for personal, family,
+or household purposes, or (2) anything designed or sold for incorporation
+into a dwelling.  In determining whether a product is a consumer product,
+doubtful cases shall be resolved in favor of coverage.  For a particular
+product received by a particular user, "normally used" refers to a
+typical or common use of that class of product, regardless of the status
+of the particular user or of the way in which the particular user
+actually uses, or expects or is expected to use, the product.  A product
+is a consumer product regardless of whether the product has substantial
+commercial, industrial or non-consumer uses, unless such uses represent
+the only significant mode of use of the product.
+
+  "Installation Information" for a User Product means any methods,
+procedures, authorization keys, or other information required to install
+and execute modified versions of a covered work in that User Product from
+a modified version of its Corresponding Source.  The information must
+suffice to ensure that the continued functioning of the modified object
+code is in no case prevented or interfered with solely because
+modification has been made.
+
+  If you convey an object code work under this section in, or with, or
+specifically for use in, a User Product, and the conveying occurs as
+part of a transaction in which the right of possession and use of the
+User Product is transferred to the recipient in perpetuity or for a
+fixed term (regardless of how the transaction is characterized), the
+Corresponding Source conveyed under this section must be accompanied
+by the Installation Information.  But this requirement does not apply
+if neither you nor any third party retains the ability to install
+modified object code on the User Product (for example, the work has
+been installed in ROM).
+
+  The requirement to provide Installation Information does not include a
+requirement to continue to provide support service, warranty, or updates
+for a work that has been modified or installed by the recipient, or for
+the User Product in which it has been modified or installed.  Access to a
+network may be denied when the modification itself materially and
+adversely affects the operation of the network or violates the rules and
+protocols for communication across the network.
+
+  Corresponding Source conveyed, and Installation Information provided,
+in accord with this section must be in a format that is publicly
+documented (and with an implementation available to the public in
+source code form), and must require no special password or key for
+unpacking, reading or copying.
+
+  7. Additional Terms.
+
+  "Additional permissions" are terms that supplement the terms of this
+License by making exceptions from one or more of its conditions.
+Additional permissions that are applicable to the entire Program shall
+be treated as though they were included in this License, to the extent
+that they are valid under applicable law.  If additional permissions
+apply only to part of the Program, that part may be used separately
+under those permissions, but the entire Program remains governed by
+this License without regard to the additional permissions.
+
+  When you convey a copy of a covered work, you may at your option
+remove any additional permissions from that copy, or from any part of
+it.  (Additional permissions may be written to require their own
+removal in certain cases when you modify the work.)  You may place
+additional permissions on material, added by you to a covered work,
+for which you have or can give appropriate copyright permission.
+
+  Notwithstanding any other provision of this License, for material you
+add to a covered work, you may (if authorized by the copyright holders of
+that material) supplement the terms of this License with terms:
+
+    a) Disclaiming warranty or limiting liability differently from the
+    terms of sections 15 and 16 of this License; or
+
+    b) Requiring preservation of specified reasonable legal notices or
+    author attributions in that material or in the Appropriate Legal
+    Notices displayed by works containing it; or
+
+    c) Prohibiting misrepresentation of the origin of that material, or
+    requiring that modified versions of such material be marked in
+    reasonable ways as different from the original version; or
+
+    d) Limiting the use for publicity purposes of names of licensors or
+    authors of the material; or
+
+    e) Declining to grant rights under trademark law for use of some
+    trade names, trademarks, or service marks; or
+
+    f) Requiring indemnification of licensors and authors of that
+    material by anyone who conveys the material (or modified versions of
+    it) with contractual assumptions of liability to the recipient, for
+    any liability that these contractual assumptions directly impose on
+    those licensors and authors.
+
+  All other non-permissive additional terms are considered "further
+restrictions" within the meaning of section 10.  If the Program as you
+received it, or any part of it, contains a notice stating that it is
+governed by this License along with a term that is a further
+restriction, you may remove that term.  If a license document contains
+a further restriction but permits relicensing or conveying under this
+License, you may add to a covered work material governed by the terms
+of that license document, provided that the further restriction does
+not survive such relicensing or conveying.
+
+  If you add terms to a covered work in accord with this section, you
+must place, in the relevant source files, a statement of the
+additional terms that apply to those files, or a notice indicating
+where to find the applicable terms.
+
+  Additional terms, permissive or non-permissive, may be stated in the
+form of a separately written license, or stated as exceptions;
+the above requirements apply either way.
+
+  8. Termination.
+
+  You may not propagate or modify a covered work except as expressly
+provided under this License.  Any attempt otherwise to propagate or
+modify it is void, and will automatically terminate your rights under
+this License (including any patent licenses granted under the third
+paragraph of section 11).
+
+  However, if you cease all violation of this License, then your
+license from a particular copyright holder is reinstated (a)
+provisionally, unless and until the copyright holder explicitly and
+finally terminates your license, and (b) permanently, if the copyright
+holder fails to notify you of the violation by some reasonable means
+prior to 60 days after the cessation.
+
+  Moreover, your license from a particular copyright holder is
+reinstated permanently if the copyright holder notifies you of the
+violation by some reasonable means, this is the first time you have
+received notice of violation of this License (for any work) from that
+copyright holder, and you cure the violation prior to 30 days after
+your receipt of the notice.
+
+  Termination of your rights under this section does not terminate the
+licenses of parties who have received copies or rights from you under
+this License.  If your rights have been terminated and not permanently
+reinstated, you do not qualify to receive new licenses for the same
+material under section 10.
+
+  9. Acceptance Not Required for Having Copies.
+
+  You are not required to accept this License in order to receive or
+run a copy of the Program.  Ancillary propagation of a covered work
+occurring solely as a consequence of using peer-to-peer transmission
+to receive a copy likewise does not require acceptance.  However,
+nothing other than this License grants you permission to propagate or
+modify any covered work.  These actions infringe copyright if you do
+not accept this License.  Therefore, by modifying or propagating a
+covered work, you indicate your acceptance of this License to do so.
+
+  10. Automatic Licensing of Downstream Recipients.
+
+  Each time you convey a covered work, the recipient automatically
+receives a license from the original licensors, to run, modify and
+propagate that work, subject to this License.  You are not responsible
+for enforcing compliance by third parties with this License.
+
+  An "entity transaction" is a transaction transferring control of an
+organization, or substantially all assets of one, or subdividing an
+organization, or merging organizations.  If propagation of a covered
+work results from an entity transaction, each party to that
+transaction who receives a copy of the work also receives whatever
+licenses to the work the party's predecessor in interest had or could
+give under the previous paragraph, plus a right to possession of the
+Corresponding Source of the work from the predecessor in interest, if
+the predecessor has it or can get it with reasonable efforts.
+
+  You may not impose any further restrictions on the exercise of the
+rights granted or affirmed under this License.  For example, you may
+not impose a license fee, royalty, or other charge for exercise of
+rights granted under this License, and you may not initiate litigation
+(including a cross-claim or counterclaim in a lawsuit) alleging that
+any patent claim is infringed by making, using, selling, offering for
+sale, or importing the Program or any portion of it.
+
+  11. Patents.
+
+  A "contributor" is a copyright holder who authorizes use under this
+License of the Program or a work on which the Program is based.  The
+work thus licensed is called the contributor's "contributor version".
+
+  A contributor's "essential patent claims" are all patent claims
+owned or controlled by the contributor, whether already acquired or
+hereafter acquired, that would be infringed by some manner, permitted
+by this License, of making, using, or selling its contributor version,
+but do not include claims that would be infringed only as a
+consequence of further modification of the contributor version.  For
+purposes of this definition, "control" includes the right to grant
+patent sublicenses in a manner consistent with the requirements of
+this License.
+
+  Each contributor grants you a non-exclusive, worldwide, royalty-free
+patent license under the contributor's essential patent claims, to
+make, use, sell, offer for sale, import and otherwise run, modify and
+propagate the contents of its contributor version.
+
+  In the following three paragraphs, a "patent license" is any express
+agreement or commitment, however denominated, not to enforce a patent
+(such as an express permission to practice a patent or covenant not to
+sue for patent infringement).  To "grant" such a patent license to a
+party means to make such an agreement or commitment not to enforce a
+patent against the party.
+
+  If you convey a covered work, knowingly relying on a patent license,
+and the Corresponding Source of the work is not available for anyone
+to copy, free of charge and under the terms of this License, through a
+publicly available network server or other readily accessible means,
+then you must either (1) cause the Corresponding Source to be so
+available, or (2) arrange to deprive yourself of the benefit of the
+patent license for this particular work, or (3) arrange, in a manner
+consistent with the requirements of this License, to extend the patent
+license to downstream recipients.  "Knowingly relying" means you have
+actual knowledge that, but for the patent license, your conveying the
+covered work in a country, or your recipient's use of the covered work
+in a country, would infringe one or more identifiable patents in that
+country that you have reason to believe are valid.
+
+  If, pursuant to or in connection with a single transaction or
+arrangement, you convey, or propagate by procuring conveyance of, a
+covered work, and grant a patent license to some of the parties
+receiving the covered work authorizing them to use, propagate, modify
+or convey a specific copy of the covered work, then the patent license
+you grant is automatically extended to all recipients of the covered
+work and works based on it.
+
+  A patent license is "discriminatory" if it does not include within
+the scope of its coverage, prohibits the exercise of, or is
+conditioned on the non-exercise of one or more of the rights that are
+specifically granted under this License.  You may not convey a covered
+work if you are a party to an arrangement with a third party that is
+in the business of distributing software, under which you make payment
+to the third party based on the extent of your activity of conveying
+the work, and under which the third party grants, to any of the
+parties who would receive the covered work from you, a discriminatory
+patent license (a) in connection with copies of the covered work
+conveyed by you (or copies made from those copies), or (b) primarily
+for and in connection with specific products or compilations that
+contain the covered work, unless you entered into that arrangement,
+or that patent license was granted, prior to 28 March 2007.
+
+  Nothing in this License shall be construed as excluding or limiting
+any implied license or other defenses to infringement that may
+otherwise be available to you under applicable patent law.
+
+  12. No Surrender of Others' Freedom.
+
+  If conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot convey a
+covered work so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you may
+not convey it at all.  For example, if you agree to terms that obligate you
+to collect a royalty for further conveying from those to whom you convey
+the Program, the only way you could satisfy both those terms and this
+License would be to refrain entirely from conveying the Program.
+
+  13. Remote Network Interaction; Use with the GNU General Public License.
+
+  Notwithstanding any other provision of this License, if you modify the
+Program, your modified version must prominently offer all users
+interacting with it remotely through a computer network (if your version
+supports such interaction) an opportunity to receive the Corresponding
+Source of your version by providing access to the Corresponding Source
+from a network server at no charge, through some standard or customary
+means of facilitating copying of software.  This Corresponding Source
+shall include the Corresponding Source for any work covered by version 3
+of the GNU General Public License that is incorporated pursuant to the
+following paragraph.
+
+  Notwithstanding any other provision of this License, you have
+permission to link or combine any covered work with a work licensed
+under version 3 of the GNU General Public License into a single
+combined work, and to convey the resulting work.  The terms of this
+License will continue to apply to the part which is the covered work,
+but the work with which it is combined will remain governed by version
+3 of the GNU General Public License.
+
+  14. Revised Versions of this License.
+
+  The Free Software Foundation may publish revised and/or new versions of
+the GNU Affero General Public License from time to time.  Such new versions
+will be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+  Each version is given a distinguishing version number.  If the
+Program specifies that a certain numbered version of the GNU Affero General
+Public License "or any later version" applies to it, you have the
+option of following the terms and conditions either of that numbered
+version or of any later version published by the Free Software
+Foundation.  If the Program does not specify a version number of the
+GNU Affero General Public License, you may choose any version ever published
+by the Free Software Foundation.
+
+  If the Program specifies that a proxy can decide which future
+versions of the GNU Affero General Public License can be used, that proxy's
+public statement of acceptance of a version permanently authorizes you
+to choose that version for the Program.
+
+  Later license versions may give you additional or different
+permissions.  However, no additional obligations are imposed on any
+author or copyright holder as a result of your choosing to follow a
+later version.
+
+  15. Disclaimer of Warranty.
+
+  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
+APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
+HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
+OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
+THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
+IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
+ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. Limitation of Liability.
+
+  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
+THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
+GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
+USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
+DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
+PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
+EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
+SUCH DAMAGES.
+
+  17. Interpretation of Sections 15 and 16.
+
+  If the disclaimer of warranty and limitation of liability provided
+above cannot be given local legal effect according to their terms,
+reviewing courts shall apply local law that most closely approximates
+an absolute waiver of all civil liability in connection with the
+Program, unless a warranty or assumption of liability accompanies a
+copy of the Program in return for a fee.
+
+                     END OF TERMS AND CONDITIONS
+
+            How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+state the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software: you can redistribute it and/or modify
+    it under the terms of the GNU Affero General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU Affero General Public License for more details.
+
+    You should have received a copy of the GNU Affero General Public License
+    along with this program.  If not, see <https://www.gnu.org/licenses/>.
+
+Also add information on how to contact you by electronic and paper mail.
+
+  If your software can interact with users remotely through a computer
+network, you should also make sure that it provides a way for users to
+get its source.  For example, if your program is a web application, its
+interface could display a "Source" link that leads users to an archive
+of the code.  There are many ways you could offer source, and different
+solutions will be better for different programs; see section 13 for the
+specific requirements.
+
+  You should also get your employer (if you work as a programmer) or school,
+if any, to sign a "copyright disclaimer" for the program, if necessary.
+For more information on this, and how to apply and follow the GNU AGPL, see
+<https://www.gnu.org/licenses/>.

README.md

@@ -98,3 +98,8 @@ npm run dev                  # Vite dev server
 npm run build                # production build
 npm run generate:types       # regenerate API types from openapi.yaml
 ```
+
+## License
+
+Licensed under the GNU Affero General Public License v3.0 or later
+(AGPL-3.0-or-later). See [`LICENSE`](LICENSE) for the full text.

backend/internal/domain/pool.go

@@ -45,10 +45,10 @@ type Pool struct {
 	// SortKey / SortOrder control how the pool's files are ordered. When SortKey
 	// is PoolSortManual, files follow the manual position order and can be
 	// reordered; otherwise they are sorted automatically and reordering is a no-op.
-	SortKey     string
+	SortKey   string
-	SortOrder   string
+	SortOrder string
-	FileCount   int
+	FileCount int
-	CreatedAt   time.Time // extracted from UUID v7 via UUIDCreatedAt
+	CreatedAt time.Time // extracted from UUID v7 via UUIDCreatedAt
 }
 
 // PoolFile is a File with its ordering position within a pool.

backend/internal/integration/server_test.go

@@ -1614,7 +1614,13 @@ func replaceDSNDatabase(dsn, newDB string) string {
 		}
 		return dsn + " dbname=" + newDB
 	}
-	// URL style: not used in our defaults, but handled for completeness.
+	// URL style (e.g. postgres://user:pass@host:port/dbname?opts): the database
+	// is the URL path. CI passes this form via TANABATA_TEST_ADMIN_DSN, so it
+	// must swap the path to point the suite at its per-run database.
+	if u, err := url.Parse(dsn); err == nil {
+		u.Path = "/" + newDB
+		return u.String()
+	}
 	return dsn
 }
 

docs/DEPLOY.md

@@ -3,13 +3,16 @@
 Tanabata is deployed by a [Gitea Actions](https://docs.gitea.com/usage/actions/overview)
 workflow ([`.gitea/workflows/deploy.yml`](../.gitea/workflows/deploy.yml)) that
 runs on the **production host itself**. On every push to `master` it updates the
-git clone in `/opt/tanabata` and runs `docker compose up -d --build` there, so the
+git clone in `/opt/tanabata`, runs the test suite (backend + frontend, in
-image is built from the freshly-pushed code and the stack is restarted.
+throwaway toolchain containers), and — only if it passes — runs
+`docker compose up -d --build` there, so the image is built from the
+freshly-pushed code and the stack is restarted.
 
 ```
 push master ──> Gitea (container) ──> act_runner (host, "host" label)
                                           │ git fetch + reset --hard   (in /opt/tanabata)
-                                          └ docker compose up -d --build
+                                          │ run tests (go + node in containers; ephemeral Postgres)
+                                          └ docker compose up -d --build   (only if tests pass)
 ```
 
 The Gitea server runs in a container, but the **runner runs directly on the host**

frontend/package.json

@@ -9,8 +9,8 @@
 		"build": "npm run generate:types && vite build",
 		"preview": "vite preview",
 		"prepare": "svelte-kit sync || echo ''",
-		"check": "svelte-kit sync && svelte-check --tsconfig ./tsconfig.json",
+		"check": "npm run generate:types && svelte-kit sync && svelte-check --tsconfig ./tsconfig.json",
-		"check:watch": "svelte-kit sync && svelte-check --tsconfig ./tsconfig.json --watch",
+		"check:watch": "npm run generate:types && svelte-kit sync && svelte-check --tsconfig ./tsconfig.json --watch",
 		"format": "prettier --write .",
 		"format:check": "prettier --check ."
 	},

frontend/src/lib/components/file/FileCard.svelte

@@ -138,6 +138,8 @@
 	class:focused
 	use:lazyload
 	data-file-index={index}
+	role="button"
+	tabindex="-1"
 	onpointerdown={onPointerDown}
 	onpointermove={onPointerMoveInternal}
 	onpointerup={() => {

frontend/src/lib/components/file/FileViewer.svelte

@@ -89,6 +89,18 @@
 		if (previewSrc) URL.revokeObjectURL(previewSrc);
 	});
 
+	// content_datetime is stored/returned as a UTC ISO instant, but
+	// <input type="datetime-local"> works in local wall-clock time with no zone.
+	// Shift by the local offset so the field shows local time; the save path
+	// (new Date(value).toISOString()) parses it back as local and re-encodes UTC.
+	function isoToLocalInput(iso?: string | null): string {
+		if (!iso) return '';
+		const d = new Date(iso);
+		if (Number.isNaN(d.getTime())) return '';
+		const local = new Date(d.getTime() - d.getTimezoneOffset() * 60000);
+		return local.toISOString().slice(0, 16); // YYYY-MM-DDTHH:mm (local)
+	}
+
 	async function loadFile(id: string) {
 		loading = true;
 		error = '';
@@ -101,9 +113,7 @@
 			if (fileId !== id) return; // paged on; ignore
 			file = fileData;
 			notes = fileData.notes ?? '';
-			contentDatetime = fileData.content_datetime
+			contentDatetime = isoToLocalInput(fileData.content_datetime);
-				? fileData.content_datetime.slice(0, 16) // YYYY-MM-DDTHH:mm
-				: '';
 			isPublic = fileData.is_public ?? false;
 			metadataNodes = objectToNodes(fileData.metadata);
 			dirty = false;
@@ -489,39 +499,43 @@
 			</div>
 		{/if}
 
-		<!-- Prev / Next -->
+		<!-- Prev / Next: the whole left/right side of the preview is a tap zone -->
 		{#if prevId}
 			<button
-				class="nav-btn nav-prev"
+				class="nav-zone nav-prev"
 				onclick={() => prevId && onNavigate(prevId)}
 				aria-label="Previous file"
 			>
-				<svg width="18" height="18" viewBox="0 0 18 18" fill="none" aria-hidden="true">
+				<span class="nav-chip">
-					<path
+					<svg width="18" height="18" viewBox="0 0 18 18" fill="none" aria-hidden="true">
-						d="M11 3L5 9L11 15"
+						<path
-						stroke="currentColor"
+							d="M11 3L5 9L11 15"
-						stroke-width="2"
+							stroke="currentColor"
-						stroke-linecap="round"
+							stroke-width="2"
-						stroke-linejoin="round"
+							stroke-linecap="round"
-					/>
+							stroke-linejoin="round"
-				</svg>
+						/>
+					</svg>
+				</span>
 			</button>
 		{/if}
 		{#if nextId}
 			<button
-				class="nav-btn nav-next"
+				class="nav-zone nav-next"
 				onclick={() => nextId && onNavigate(nextId)}
 				aria-label="Next file"
 			>
-				<svg width="18" height="18" viewBox="0 0 18 18" fill="none" aria-hidden="true">
+				<span class="nav-chip">
-					<path
+					<svg width="18" height="18" viewBox="0 0 18 18" fill="none" aria-hidden="true">
-						d="M7 3L13 9L7 15"
+						<path
-						stroke="currentColor"
+							d="M7 3L13 9L7 15"
-						stroke-width="2"
+							stroke="currentColor"
-						stroke-linecap="round"
+							stroke-width="2"
-						stroke-linejoin="round"
+							stroke-linecap="round"
-					/>
+							stroke-linejoin="round"
-				</svg>
+						/>
+					</svg>
+				</span>
 			</button>
 		{/if}
 	</div>
@@ -554,7 +568,7 @@
 			</section>
 
 			<section class="section">
-				<label class="field-label" for="datetime">Date taken</label>
+				<label class="field-label" for="datetime">Content date</label>
 				<input
 					id="datetime"
 					type="datetime-local"
@@ -746,15 +760,17 @@
 		overflow: hidden;
 	}
 
-	/* Whole preview area is a link: click opens the original in a new tab. */
+	/* The link fills the area for centring, but only the image itself is
+	   clickable (pointer-events below) — tapping the black margins does nothing,
+	   so "open original" fires only on the preview. */
 	.preview-link {
 		width: 100%;
 		height: 100%;
 		display: flex;
 		align-items: center;
 		justify-content: center;
-		cursor: zoom-in;
 		text-decoration: none;
+		pointer-events: none;
 	}
 
 	.preview-img {
@@ -762,12 +778,14 @@
 		max-height: 100%;
 		object-fit: contain;
 		display: block;
+		cursor: zoom-in;
+		pointer-events: auto; /* only the image opens the original */
 	}
 
 	.preview-busy {
 		position: absolute;
 		inset: 0;
-		z-index: 2;
+		z-index: 4; /* above the nav zones — an in-flight replace blocks paging */
 		display: flex;
 		flex-direction: column;
 		align-items: center;
@@ -808,33 +826,58 @@
 		background-color: #1a1010;
 	}
 
-	/* ---- Nav buttons ---- */
+	/* ---- Nav zones ----
-	.nav-btn {
+	   Each covers the full-height left/right portion of the preview so paging
+	   only needs a tap on that side, not a precise hit on the arrow. They sit
+	   above the image, so over a full-width image the sides page and the centre
+	   still opens the original. The dark hint gradient shows on hover only, to
+	   keep photos clean on touch where there is no hover. */
+	.nav-zone {
 		position: absolute;
-		top: 50%;
+		top: 0;
-		transform: translateY(-50%);
+		bottom: 0;
-		width: 40px;
+		width: 30%;
-		height: 40px;
+		max-width: 220px;
-		border-radius: 50%;
 		border: none;
-		background-color: rgba(0, 0, 0, 0.55);
+		background: none;
-		color: #fff;
+		padding: 0 12px;
 		display: flex;
 		align-items: center;
-		justify-content: center;
 		cursor: pointer;
-		transition: background-color 0.15s;
+		z-index: 3;
-	}
+		-webkit-tap-highlight-color: transparent;
-
-	.nav-btn:hover {
-		background-color: rgba(0, 0, 0, 0.8);
 	}
 
 	.nav-prev {
-		left: 10px;
+		left: 0;
+		justify-content: flex-start;
 	}
 	.nav-next {
-		right: 10px;
+		right: 0;
+		justify-content: flex-end;
+	}
+
+	.nav-prev:hover {
+		background: linear-gradient(to right, rgba(0, 0, 0, 0.3), transparent);
+	}
+	.nav-next:hover {
+		background: linear-gradient(to left, rgba(0, 0, 0, 0.3), transparent);
+	}
+
+	.nav-chip {
+		display: flex;
+		align-items: center;
+		justify-content: center;
+		width: 40px;
+		height: 40px;
+		border-radius: 50%;
+		background-color: rgba(0, 0, 0, 0.55);
+		color: #fff;
+		transition: background-color 0.15s;
+	}
+
+	.nav-zone:hover .nav-chip {
+		background-color: rgba(0, 0, 0, 0.8);
 	}
 
 	/* ---- Metadata panel ---- */

frontend/src/lib/components/file/FilterBar.svelte

@@ -1,4 +1,5 @@
 <script lang="ts">
+	import { untrack } from 'svelte';
 	import type { Tag } from '$lib/api/types';
 	import { fetchAllTags } from '$lib/api/tags';
 	import { buildDslFilter, parseDslFilter, tokenLabel } from '$lib/utils/dsl';
@@ -16,7 +17,9 @@
 
 	let tags = $state<Tag[]>([]);
 	let search = $state('');
-	let tokens = $state<string[]>(parseDslFilter(value));
+	// Seed from the prop once; the $effect below keeps it in sync afterwards, so
+	// read it untracked to avoid the state-referenced-locally warning.
+	let tokens = $state<string[]>(untrack(() => parseDslFilter(value)));
 	let tagNames = $derived(
 		new Map(tags.filter((t) => t.id && t.name).map((t) => [t.id as string, t.name as string]))
 	);

frontend/src/lib/components/layout/SelectionBar.svelte

@@ -1,21 +1,32 @@
 <script lang="ts">
-	import { selectionStore, selectionCount } from '$lib/stores/selection';
-
 	interface Props {
+		count: number;
+		onClear: () => void;
 		onEditTags: () => void;
 		onAddToPool: () => void;
 		onMarkReviewed: () => void;
 		onDelete: () => void;
+		// Optional: only shown in a pool context (removes the files from that pool
+		// without deleting them). Omitted on the global files list.
+		onRemoveFromPool?: () => void;
 	}
 
-	let { onEditTags, onAddToPool, onMarkReviewed, onDelete }: Props = $props();
+	let {
+		count,
+		onClear,
+		onEditTags,
+		onAddToPool,
+		onMarkReviewed,
+		onDelete,
+		onRemoveFromPool
+	}: Props = $props();
 </script>
 
 <div class="bar" role="toolbar" aria-label="Selection actions">
 	<div class="row">
 		<!-- Count / deselect all -->
-		<button class="count" onclick={() => selectionStore.exit()} title="Clear selection">
+		<button class="count" onclick={onClear} title="Clear selection">
-			<span class="num">{$selectionCount}</span>
+			<span class="num">{count}</span>
 			<span class="label">selected</span>
 			<svg
 				class="close-icon"
@@ -39,6 +50,9 @@
 		<button class="action edit-tags" onclick={onEditTags}>Edit tags</button>
 		<button class="action add-pool" onclick={onAddToPool}>Add to pool</button>
 		<button class="action mark-reviewed" onclick={onMarkReviewed}>Mark reviewed</button>
+		{#if onRemoveFromPool}
+			<button class="action remove-pool" onclick={onRemoveFromPool}>Remove from pool</button>
+		{/if}
 		<button class="action delete" onclick={onDelete}>Delete</button>
 	</div>
 </div>
@@ -72,6 +86,7 @@
 	.row {
 		display: flex;
 		align-items: center;
+		flex-wrap: wrap;
 		gap: 4px;
 	}
 
@@ -124,6 +139,7 @@
 		font-size: 0.85rem;
 		font-family: inherit;
 		font-weight: 600;
+		white-space: nowrap;
 	}
 
 	.edit-tags {
@@ -150,6 +166,15 @@
 		background-color: color-mix(in srgb, var(--color-success) 15%, transparent);
 	}
 
+	.remove-pool {
+		color: var(--color-text-muted);
+	}
+
+	.remove-pool:hover {
+		background-color: color-mix(in srgb, var(--color-accent) 15%, transparent);
+		color: var(--color-text-primary);
+	}
+
 	.delete {
 		color: var(--color-danger);
 	}

frontend/src/lib/components/tag/TagBadge.svelte

@@ -13,8 +13,8 @@
 
 	let { tag, onclick, size = 'md', focused = false, index }: Props = $props();
 
-	const color = tag.color ?? tag.category_color;
+	let color = $derived(tag.color ?? tag.category_color);
-	const style = color ? `background-color: #${color}` : '';
+	let style = $derived(color ? `background-color: #${color}` : '');
 </script>
 
 {#if onclick}

frontend/src/lib/utils/rovingGrid.svelte.ts

@@ -42,8 +42,7 @@ export function createRovingGrid<T extends Item>(opts: RovingGridOptions<T>) {
 	function isFormTarget(t: EventTarget | null): boolean {
 		return (
 			t instanceof HTMLElement &&
-			(t.isContentEditable ||
+			(t.isContentEditable || ['INPUT', 'TEXTAREA', 'SELECT', 'BUTTON', 'A'].includes(t.tagName))
-				['INPUT', 'TEXTAREA', 'SELECT', 'BUTTON', 'A'].includes(t.tagName))
 		);
 	}
 

frontend/src/routes/admin/users/[id]/+page.svelte

@@ -107,6 +107,7 @@
 						class:on={isAdmin}
 						role="switch"
 						aria-checked={isAdmin}
+						aria-label="Admin"
 						onclick={() => (isAdmin = !isAdmin)}><span class="thumb"></span></button
 					>
 				</div>
@@ -121,6 +122,7 @@
 						class:on={canCreate}
 						role="switch"
 						aria-checked={canCreate}
+						aria-label="Can create"
 						onclick={() => (canCreate = !canCreate)}><span class="thumb"></span></button
 					>
 				</div>
@@ -140,6 +142,7 @@
 						class:danger={isBlocked}
 						role="switch"
 						aria-checked={isBlocked}
+						aria-label="Blocked"
 						onclick={() => (isBlocked = !isBlocked)}><span class="thumb"></span></button
 					>
 				</div>

frontend/src/routes/files/+page.svelte

@@ -12,7 +12,7 @@
 	import SelectionBar from '$lib/components/layout/SelectionBar.svelte';
 	import InfiniteScroll from '$lib/components/common/InfiniteScroll.svelte';
 	import { fileSorting, type FileSortField } from '$lib/stores/sorting';
-	import { selectionStore, selectionActive } from '$lib/stores/selection';
+	import { selectionStore, selectionActive, selectionCount } from '$lib/stores/selection';
 	import ConfirmDialog from '$lib/components/common/ConfirmDialog.svelte';
 	import BulkTagEditor from '$lib/components/file/BulkTagEditor.svelte';
 	import PoolPicker from '$lib/components/file/PoolPicker.svelte';
@@ -129,9 +129,7 @@
 		selectionStore.exit();
 		try {
 			await api.post('/files/bulk/review', { file_ids: ids, needs_review: false });
-			files = files.map((f) =>
+			files = files.map((f) => (ids.includes(f.id ?? '') ? { ...f, needs_review: false } : f));
-				ids.includes(f.id ?? '') ? { ...f, needs_review: false } : f
-			);
 		} catch {
 			// ignore — list already reflects the intended state optimistically
 		}
@@ -148,7 +146,8 @@
 	function handleKey(e: KeyboardEvent) {
 		if (e.key === 'Escape') {
 			if (tagEditorOpen) tagEditorOpen = false;
-			else if (poolPickerOpen) return; // PoolPicker owns Escape (clear search, then close)
+			else if (poolPickerOpen)
+				return; // PoolPicker owns Escape (clear search, then close)
 			else if (confirmDeleteFiles) confirmDeleteFiles = false;
 			else if (activeFileId) return;
 			else if ($selectionActive) selectionStore.exit();
@@ -784,6 +783,8 @@
 
 {#if $selectionActive}
 	<SelectionBar
+		count={$selectionCount}
+		onClear={() => selectionStore.exit()}
 		onEditTags={openTagEditor}
 		onAddToPool={openPoolPicker}
 		onMarkReviewed={markSelectionReviewed}

frontend/src/routes/files/duplicates/+page.svelte

@@ -1,11 +1,7 @@
 <script lang="ts">
 	import { goto } from '$app/navigation';
 	import { api } from '$lib/api/client';
-	import {
+	import { getDuplicates, dismissDuplicate, type DuplicatePairDistance } from '$lib/api/duplicates';
-		getDuplicates,
-		dismissDuplicate,
-		type DuplicatePairDistance
-	} from '$lib/api/duplicates';
 	import Thumb from '$lib/components/file/Thumb.svelte';
 	import DuplicateMergeDialog from '$lib/components/file/DuplicateMergeDialog.svelte';
 	import FileViewer from '$lib/components/file/FileViewer.svelte';
@@ -296,7 +292,9 @@
 					{#each c.files.filter((f) => f.id !== keep) as other (other.id)}
 						{@const dist = distanceFromKeep(c, keep, other.id)}
 						<div class="actrow">
-							<span class="aname" title={other.original_name ?? ''}>{other.original_name ?? '—'}</span>
+							<span class="aname" title={other.original_name ?? ''}
+								>{other.original_name ?? '—'}</span
+							>
 							<span
 								class="dist"
 								class:unknown={dist === null}

frontend/src/routes/pools/[id]/+page.svelte

@@ -7,6 +7,8 @@
 	import FileViewer from '$lib/components/file/FileViewer.svelte';
 	import FilterBar from '$lib/components/file/FilterBar.svelte';
 	import PoolPicker from '$lib/components/file/PoolPicker.svelte';
+	import BulkTagEditor from '$lib/components/file/BulkTagEditor.svelte';
+	import SelectionBar from '$lib/components/layout/SelectionBar.svelte';
 	import InfiniteScroll from '$lib/components/common/InfiniteScroll.svelte';
 	import ConfirmDialog from '$lib/components/common/ConfirmDialog.svelte';
 	import { parseDslFilter } from '$lib/utils/dsl';
@@ -44,11 +46,13 @@
 	let filterOpen = $state(false);
 	let activeTokens = $derived(parseDslFilter(filterParam));
 
-	// ---- Selection (for removal) ----
+	// ---- Selection + bulk actions (mirrors the files page) ----
 	let selectedIds = $state(new Set<string>());
 	let selectionMode = $derived(selectedIds.size > 0);
 	let lastSelectedIdx = $state<number | null>(null);
 	let confirmRemove = $state(false);
+	let confirmDeleteFiles = $state(false);
+	let tagEditorOpen = $state(false);
 	let poolPickerOpen = $state(false);
 
 	// ---- Add files mode ----
@@ -238,10 +242,20 @@
 		lastSelectedIdx = idx;
 	}
 
+	function clearSelection() {
+		selectedIds = new Set();
+		lastSelectedIdx = null;
+	}
+
+	function openTagEditor() {
+		tagEditorOpen = true;
+		void tick().then(() => document.querySelector<HTMLInputElement>('.tag-sheet input')?.focus());
+	}
+
 	async function removeSelected() {
 		confirmRemove = false;
 		const ids = [...selectedIds];
-		selectedIds = new Set();
+		clearSelection();
 		try {
 			await api.post(`/pools/${poolId}/files/remove`, { file_ids: ids });
 			files = files.filter((f) => !ids.includes(f.id ?? ''));
@@ -251,6 +265,34 @@
 		}
 	}
 
+	// Mark the selection as review-done; optimistically clear the local badges.
+	async function markSelectionReviewed() {
+		const ids = [...selectedIds];
+		if (ids.length === 0) return;
+		clearSelection();
+		try {
+			await api.post('/files/bulk/review', { file_ids: ids, needs_review: false });
+			files = files.map((f) => (ids.includes(f.id ?? '') ? { ...f, needs_review: false } : f));
+		} catch {
+			// ignore — the list already reflects the intended state
+		}
+	}
+
+	// Move the selection to trash. Trashed files drop out of the pool view (which
+	// only lists live files); pool membership is kept, so file_count is left to
+	// the server's truth on the next load rather than adjusted optimistically.
+	async function deleteSelected() {
+		confirmDeleteFiles = false;
+		const ids = [...selectedIds];
+		clearSelection();
+		try {
+			await api.post('/files/bulk/delete', { file_ids: ids });
+			files = files.filter((f) => !ids.includes(f.id ?? ''));
+		} catch {
+			// silently ignore — list already updated optimistically
+		}
+	}
+
 	// ---- File viewer overlay (shallow routing) ----
 	// Open the viewer on top of the still-mounted pool grid so the back button (and
 	// the viewer's own close) returns here — with the pool's list and scroll intact —
@@ -629,8 +671,8 @@
 							aria-label="Sort files"
 						>
 							<option value="manual">Manual order</option>
-							<option value="content_datetime">Date</option>
+							<option value="content_datetime">Content date</option>
-							<option value="created">Date added</option>
+							<option value="created">Created</option>
 							<option value="original_name">Name</option>
 						</select>
 						{#if sortKey !== 'manual'}
@@ -739,46 +781,61 @@
 	</div>
 {/if}
 
-<!-- Selection bar (remove mode) -->
+<!-- Selection actions — same set as the files page, plus Remove from pool. -->
 {#if selectionMode && !addMode}
-	<div class="selection-bar" role="toolbar">
+	<SelectionBar
-		<button
+		count={selectedIds.size}
-			class="sel-cancel"
+		onClear={clearSelection}
-			onclick={() => {
+		onEditTags={openTagEditor}
-				selectedIds = new Set();
+		onAddToPool={() => (poolPickerOpen = true)}
-				lastSelectedIdx = null;
+		onMarkReviewed={markSelectionReviewed}
-			}}
+		onRemoveFromPool={() => (confirmRemove = true)}
-		>
+		onDelete={() => (confirmDeleteFiles = true)}
-			<span class="sel-num">{selectedIds.size}</span>
+	/>
-			<span class="sel-label">selected</span>
+{/if}
-			<svg width="14" height="14" viewBox="0 0 14 14" fill="none" aria-hidden="true">
+
-				<path
+<!-- Bulk tag editor sheet -->
-					d="M2 2l10 10M12 2L2 12"
+{#if tagEditorOpen}
-					stroke="currentColor"
+	<!-- svelte-ignore a11y_click_events_have_key_events -->
-					stroke-width="1.8"
+	<div class="picker-backdrop" role="presentation" onclick={() => (tagEditorOpen = false)}></div>
-					stroke-linecap="round"
+	<div class="picker-sheet tag-sheet" role="dialog" aria-label="Edit tags">
-				/>
+		<div class="picker-header">
-			</svg>
+			<span class="picker-title"
-		</button>
+				>Edit tags — {selectedIds.size} file{selectedIds.size !== 1 ? 's' : ''}</span
-		<div class="sel-spacer"></div>
+			>
-		<button class="sel-action add-action" onclick={() => (poolPickerOpen = true)}>
+			<button class="picker-close" onclick={() => (tagEditorOpen = false)} aria-label="Close">
-			Add to pool
+				<svg width="16" height="16" viewBox="0 0 16 16" fill="none" aria-hidden="true">
-		</button>
+					<path
-		<button class="sel-action remove-action" onclick={() => (confirmRemove = true)}>
+						d="M3 3l10 10M13 3L3 13"
-			Remove from pool
+						stroke="currentColor"
-		</button>
+						stroke-width="1.8"
+						stroke-linecap="round"
+					/>
+				</svg>
+			</button>
+		</div>
+		<div class="tag-sheet-body">
+			<BulkTagEditor fileIds={[...selectedIds]} onDone={() => (tagEditorOpen = false)} />
+		</div>
 	</div>
 {/if}
 
+{#if confirmDeleteFiles}
+	<ConfirmDialog
+		message={`Move ${selectedIds.size} file${selectedIds.size !== 1 ? 's' : ''} to trash?`}
+		confirmLabel="Move to trash"
+		danger
+		onConfirm={deleteSelected}
+		onCancel={() => (confirmDeleteFiles = false)}
+	/>
+{/if}
+
 <!-- Add the selected files to another pool (reuses the file picker; the order
      follows the selection's insertion order). -->
 {#if poolPickerOpen}
 	<PoolPicker
 		fileIds={[...selectedIds]}
-		onAdded={() => {
+		onAdded={clearSelection}
-			selectedIds = new Set();
-			lastSelectedIdx = null;
-		}}
 		onClose={() => (poolPickerOpen = false)}
 	/>
 {/if}
@@ -1222,21 +1279,64 @@
 		font-size: 0.9rem;
 	}
 
-	/* ---- Selection bar ---- */
+	/* ---- Bulk tag editor sheet (shared shell with the files page) ---- */
-	.selection-bar {
+	.picker-backdrop {
 		position: fixed;
-		left: 10px;
+		inset: 0;
-		right: 10px;
+		z-index: 110;
-		bottom: 65px;
+		background: rgba(0, 0, 0, 0.5);
+	}
+
+	.picker-sheet {
+		position: fixed;
+		left: 0;
+		right: 0;
+		bottom: 0;
+		z-index: 111;
 		background-color: var(--color-bg-secondary);
-		border-radius: 10px;
+		border-radius: 14px 14px 0 0;
-		box-shadow: 0 0 12px rgba(0, 0, 0, 0.5);
+		padding-bottom: env(safe-area-inset-bottom, 0px);
-		padding: 10px 14px;
+		max-height: 70dvh;
-		z-index: 100;
+		display: flex;
+		flex-direction: column;
+		animation: slide-up 0.18s ease-out;
+	}
+
+	.tag-sheet {
+		max-height: 80dvh;
+	}
+
+	.picker-header {
 		display: flex;
 		align-items: center;
-		gap: 4px;
+		padding: 14px 16px 10px;
-		animation: slide-up 0.18s ease-out;
+		gap: 8px;
+	}
+
+	.picker-title {
+		flex: 1;
+		font-size: 0.95rem;
+		font-weight: 600;
+	}
+
+	.picker-close {
+		background: none;
+		border: none;
+		cursor: pointer;
+		color: var(--color-text-muted);
+		padding: 4px;
+		display: flex;
+		align-items: center;
+	}
+
+	.picker-close:hover {
+		color: var(--color-text-primary);
+	}
+
+	.tag-sheet-body {
+		padding: 0 14px 16px;
+		overflow-y: auto;
+		flex: 1;
 	}
 
 	@keyframes slide-up {
@@ -1250,62 +1350,6 @@
 		}
 	}
 
-	.sel-cancel {
-		display: flex;
-		align-items: center;
-		gap: 5px;
-		background: none;
-		border: none;
-		cursor: pointer;
-		padding: 4px 6px;
-		border-radius: 6px;
-		color: var(--color-text-muted);
-		font-family: inherit;
-	}
-	.sel-cancel:hover {
-		background-color: color-mix(in srgb, var(--color-accent) 12%, transparent);
-		color: var(--color-text-primary);
-	}
-
-	.sel-num {
-		font-size: 1.1rem;
-		font-weight: 700;
-		color: var(--color-text-primary);
-	}
-
-	.sel-label {
-		font-size: 0.85rem;
-	}
-
-	.sel-spacer {
-		flex: 1;
-	}
-
-	.sel-action {
-		background: none;
-		border: none;
-		cursor: pointer;
-		padding: 6px 10px;
-		border-radius: 6px;
-		font-size: 0.85rem;
-		font-family: inherit;
-		font-weight: 600;
-	}
-
-	.add-action {
-		color: var(--color-accent);
-	}
-	.add-action:hover {
-		background-color: color-mix(in srgb, var(--color-accent) 15%, transparent);
-	}
-
-	.remove-action {
-		color: var(--color-danger);
-	}
-	.remove-action:hover {
-		background-color: color-mix(in srgb, var(--color-danger) 15%, transparent);
-	}
-
 	/* ---- Add files overlay ---- */
 	.add-overlay {
 		position: absolute;

frontend/static/manifest.webmanifest

@@ -10,53 +10,28 @@
   "theme_color": "#312F45",
   "icons": [
     {
-      "src": "/images/android-icon-36x36.png",
+      "src": "/images/icon-tile-192x192.png",
-      "sizes": "36x36",
-      "type": "image/png"
-    },
-    {
-      "src": "/images/android-icon-48x48.png",
-      "sizes": "48x48",
-      "type": "image/png"
-    },
-    {
-      "src": "/images/android-icon-72x72.png",
-      "sizes": "72x72",
-      "type": "image/png"
-    },
-    {
-      "src": "/images/android-icon-96x96.png",
-      "sizes": "96x96",
-      "type": "image/png"
-    },
-    {
-      "src": "/images/android-icon-144x144.png",
-      "sizes": "144x144",
-      "type": "image/png"
-    },
-    {
-      "src": "/images/pwa-192x192.png",
       "sizes": "192x192",
       "type": "image/png",
       "purpose": "any"
     },
     {
-      "src": "/images/pwa-512x512.png",
+      "src": "/images/icon-tile-512x512.png",
       "sizes": "512x512",
       "type": "image/png",
       "purpose": "any"
     },
     {
-      "src": "/images/pwa-maskable-192x192.png",
+      "src": "/images/icon-maskable-192x192.png",
       "sizes": "192x192",
       "type": "image/png",
       "purpose": "maskable"
     },
     {
-      "src": "/images/pwa-maskable-512x512.png",
+      "src": "/images/icon-maskable-512x512.png",
       "sizes": "512x512",
       "type": "image/png",
       "purpose": "maskable"
     }
   ]
-}
+}

openapi.yaml

@@ -4,6 +4,11 @@ info:
   description: |
     REST API for Tanabata File Manager — a multi-user, tag-based web file manager.
 
+    ## Versioning
+    The `version` field above is the product release (tracks the app's 3.0.0).
+    The URL path version (`/api/v1`) is the API compatibility version and changes
+    only on a breaking contract change — the two are intentionally independent.
+
     ## Authentication
     All endpoints require a Bearer JWT token in the `Authorization` header,
     except `POST /auth/login`, `POST /auth/refresh` (which carry their own
@@ -35,7 +40,8 @@ info:
     Example: `{r=1,&,m~image%}` → needs review AND is an image.
   version: 3.0.0
   license:
-    name: Proprietary
+    name: AGPL-3.0-or-later
+    url: https://www.gnu.org/licenses/agpl-3.0.html
 
 servers:
   - url: /api/v1